Friday, November 25, 2011

Fix MBR in Windows XP

What is the MBR? MBR stands for Master Boot Record and it’s the first sector of your hard drive that basically tells the BIOS where to look for the operating system on your computer.

If, for any reason, the MBR becomes damaged or corrupt, then the operating system will be unable to load. You will normally see error messages like:



Error loading operating system

Missing operating system

Invalid partition table

These messages are definitely not fun, especially if you are not familiar with computers. Most people would automatically assume their computers are dead! However, that’s not true. Being in IT myself, these errors are actually preferably to other types of Windows errors. Why?

Well, it’s actually fairly easy to fix the Master Boot Record in XP and Vista. All you have to do is load up the Recovery Console and run a simple command. All of your data, applications, settings, etc are still intact on the drive and once the MBR is fixed, the computer will load normally.

So how can you repair your damaged MBR? Here are the steps to follow:



1. First, restart your computer with the Windows XP setup disk in the CD drive. If you don’t have your original disk, borrow one or download a ISO image from a torrent site.

2. When prompted, boot from the CD drive by pressing any key. If Windows loads automatically, you will first have to enter the BIOS setup and change the order of the boot devices to start with the CD drive.


3. Once the setup loads, you will see the option to press R to repair a Windows installation.


4. Once the Recovery Console loads up, you will have to type in a number that corresponds to your Windows installation. This is normally just 1. Press Enter and then type in the Administrator password


5. Now at the prompt, type in fixmbr. Your damaged MBR will now be replaced with a new master boot record and your computer should now be able to boot properly. Note that you may also want to run the fixboot command to repair the boot sector with a new one.

Also, make sure you only use these commands on a system with one operating system installed. If you have more than one operating system installed, fixmbr and fixboot could mess up everything.

2 comments:

Computer Hardware Repair said...

Hi all,

The master boot record or MBR is the file that tells the Windows operating system how to initiate its start-up procedure. A damaged MBR can cause problems during Windows XP start-up or can cause the operating system to not be able to boot at all. Thanks for sharing it......

Anonymous said...

Nice post!

Producer Chris Young

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Subscribe via email

Enter your email address:

Delivered by FeedBurner

Total Pageviews

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
|