Resolve Limited Or No Connectivity Errors in Windows

Limited or no connectivity: The connection has limited or no connectivity. You might be unable to access the Internet or some network resources.

This message can result from any of several different technical glitches or configuration problems. Follow these steps to resolve Limited Or No Connectivity errors in Windows.

Here's How to solve the issue:

Step 1:. Determine whether your network access is functioning properly (that you can reach local network resources and the Internet). If you are using a broadband Internet and Windows XP Service Pack 2, this message is often a false error report. See Microsoft Knowledge Base article 892896 for details on how to work around this error appropriately.

If your network access is non-functional. continue to the following steps.

Step 2: If your computer connects to the network through a broadband router , resetting (powering off and on) the router may resolve the issue. If not using a broadband router, or if resetting your router only temporarily resolves the issue and the error message re-appears later, continue to the following steps.

Step 3: If connecting to your network using Wi-Fi and using wireless security, your WEP or other security key may not be set properly. Check the wireless security configuration on your computer's network adapter and update if it necessary.

Step 4: If connecting to your network using an Ethernet cable, your cable may have failed. Temporarily replace your network cable with a new one to determine whether this resolves the issue.

Step 5: If using a broadband router and DHCP on your network, check your computer's IP address to verify it is valid and not a private address that starts with 169.254. An invalid address of the form 169.254.x.x signifies your computer's inability to obtain a usable IP address from your router.

To resolve DHCP configuration problems, proceed to the following steps.

Step 6: Reboot your computer, router (if present) and broadband modem together, then re-test your connection.

Step 7: If your connection remains non-functional, run the Windows Network Repair utility on your computer.

Step 8: If your connection remains non-functional, update your router settings to change from dynamic to static IP address configuration, and set an IP address on the computer appropriately.

Step 9: If your connection remains non-functional, unplug your router and connect the computer directly to your broadband modem. If this configuration is functional, contact the manufacturer of your router for additional support.

Step 10: If your computer is connecting to your network directly through a broadband modem, or if your Internet access remains non-functional after following the instructions above, contact your Internet provider for support.

Read more »

Fix Svchost.exe Application Error

Verify and Configure your Windows Update Service Settings

Step 1
Click on the Start button at the bottom left-hand corner of your desktop. Once the Start menu opens, click Run and then type "services.msc" in the text field. Click OK when you are done.

Step 2
Navigate to the Automatic Updates service in the right-hand pane and then double-click on it. Select the Log On tab. Make sure that Local System Account is selected as the default logon account.

Step 3
Uncheck the option "Allow service to interact with desktop." Now go to the Hardware Profile section, also found under the Log On tab. Enable this service.

Step 4
Click on the General tab. Verify that the start-up type is set to Automatic. If not, use the drop-down menu to select this option.

Step 5
Go to the Service Status section. Click on the Start button to enable this service. Do the same thing for the Background Intelligent Transfer Service (or BITS).

Reconfigure Your Windows Update DLLs

Step 1
Click the Start button and then click Run. Type "cmd" into the text field. Click OK.

Step 2
In the Command Prompt, type in REGSVR32 WUAPI.DLL and hit Enter.

Step 3
Wait until you receive a message reading "DllRegisterServer in WUAPI.DLL succeeded."

Step 4
Repeat this process for each of the following commands; type in each command and hit Enter after each line:

REGSVR32 WUAUENG.DLL

REGSVR32 WUAUENG1.DLL

REGSVR32 ATL.DLL

REGSVR32 WUCLTUI.DLL

REGSVR32 WUPS.DLL

REGSVR32 WUPS2.DLL

REGSVR32 WUWEB.DLL

Delete the Corrupted Windows Update Files

Step 1
Type the following command into the command prompt and press Enter: net stop WuAuServ. Type in: cd %windir% and hit Enter.

Step 2
Now type in: ren SoftwareDistribution SD_OLD. This will rename the SoftwareDistribution folder.

Step 3
Restart the Windows Update service by inputting the following command: net start WuAuServ.

Step 4
Type in: Exit and then hit Enter to close the Windows Command Prompt.

Step 5
Reboot your PC. When you restart Windows, you shouldn't receive this error message anymore. If you do, download the two Windows Updates listed below.

Source :- http://www.ehow.com/how_4480978_fix-application-error-windows-xp.html#ixzz1flk2yhN3

Read more »

How to fix 25003 error

Method 1: Clean the CD-ROM
To clean the CD-ROM, use a CD-ROM cleaning kit, or gently wipe the silver side of the CD-ROM with a soft, lint-free cotton cloth. Do not use paper cloth, which can scratch the plastic and leave streaks. When you clean the CD-ROM, wipe from the center of the disc outward. Do not use a circular motion.

If this does not resolve the issue, clean the CD-ROM with a damp lint-free cotton cloth. Dry the CD-ROM thoroughly before you insert it into the CD-ROM drive or DVD-ROM drive.

Method 2: Show Hidden Files on the Network Share
Click Start, and then click Control Panel.
Double-click Folder Options.
Click the View tab.
Click to select the Show All Files check box.
Click to clear the Hide file extensions of known file types check box.
Click to clear the Hide protected operating system files check box.
Click Apply, and then click OK. If this does not resolve this issue, contact your network administrator for information about how to replace the missing or corrupted files.

Method 3: Clean Boot Your Computer
Use a clean boot to restart your computer, and then see if the issue persists. A clean boot is a method to create a clean environment. When you start your computer with a clean boot, Microsoft Windows starts and loads only the basic devices and services.

To restart your computer with a clean boot, follow the steps that are appropriate to your operating system.
Windows XP
Click Start, and then click Run.
Type msconfig in the Open box, and then click OK.
Click the General tab, and then click Selective Startup.
Under Selective Startup, click to clear the following check boxes :
Process System.ini file
Process Win.ini file
Load Startup Items
Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
Click OK, and then click Restart to restart the computer.
NOTE: To restore the computer to use a normal startup, click Normal Startup - load all device drivers and services on the General tab in the System Configuration Utility, click OK, and then click Restart to restart the computer.

Windows Me
Click Start, and then click Run.
Type msconfig in the Open box, and then click OK.
Click the General tab, and then click Selective Startup.
Under Selective Startup, click to clear all the check boxes.
On the Startup tab, click to select the *StateMgr check box, click OK, and then click Yes when you receive a prompt to restart the computer.
After the computer restarts, click Start, click Run, type msconfig in the Open box, and then click OK.

IMPORTANT: Make sure that the check boxes that you cleared in the General tab are still cleared. If you see a check box that is selected, but the check box is not available (the check box is dimmed and has a check mark in the check box), your computer is not clean-booted, and you may require assistance from the manufacturer of the program that is listed next to the selected, unavailable check box.

NOTE: To restore the computer to use a normal startup, click Normal Startup on the General tab in the System Configuration Utility, click OK, and then restart the computer.

Windows 98


Click Start, point to Programs, point to Accessories, point to System Tools, and then click System Information.
On the Tools menu, click System Configuration Utility.
Click the General tab, click Selective Startup, and then click to clear the following check boxes:
Process Config.sys file
Process Autoexec.bat file
Process Winstart.bat file (if available)
Process Win.ini file
Load Startup group items
Click OK, and then restart the computer.

Read more »

Fix blue screens in windows 7

The blue screen error — also known as Blue Screen of Death (BSOD) — is pretty common on all versions of Windows, be it the oldest or even the newest one. This error can get really annoying. It can even block users from logging onto their Windows operating system. As a result, the system is seemingly impossible to use at all. But what PC users should keep in mind is that they are not the only people to experience this particular problem. As mentioned earlier, it has been pretty common and, fortunately, people have found out some workaround methods that may prove to be quite effective in solving the BSOD.



BSOD Triggers

However, it is important to understand what may have triggered the BSOD. Most of the time, BSOD can be triggered by a recent change in either the computer’s hardware or software. For example, a newly installed hardware will most likely need proper driver files in order to work properly. Although it is true that the drivers are normally provided with the hardware, there are times when the driver files may happen to be corrupted. Another possibility is that one or more of the applications or software installed on the system encounters conflicts. Also, taking into accounts that drivers are software as well, they may just as well trigger the conflicts.

Yet, if the problem is not on the software, chances are there is something wrong with the hardware. It may have been damaged or installed improperly. In this case, it is always a good idea to try using the hardware in question on another computer to see if it works.

How to Solve BSOD

There are several ways that may well solve the blue screen error. The first way is to uninstall the drivers and try to install the latest drivers from the website of the hardware vendor. Secondly, it is worth trying to uninstall the device using the Device Manager utility. Last but not least, System Restore utility built into Windows may also be pretty helpful.

However, some people may wonder how they can run all these utilities if they cannot even log onto Windows. Well, the Safe Mode provided with each version of Windows is normally the answer to this. When the computer is trying to boot after passing the self diagnosis process, constantly hitting the F8 key will usually display a list of advanced Windows options, one of which is the Safe Mode. Choosing it will enable users to log onto the system yet with limited capabilities. However, it is enough to solve the BSOD.

So, at this stage, it is possible to use any of the 3 possible methods mentioned earlier. The first is to uninstall the drivers. Yet, one thing that is important to keep in mind that Windows tends to leave junks behind after some things are uninstalled. Therefore, it may be necessary to launch the Registry Cleaners to clean up the rest of the troublesome drivers. Manual registry edition is not advisable for newbies because Windows Registry it`s such delicate thing that, you can easily damage Windows functionality if you’re not know what are you doing!

The second method is to uninstall the device using Device Management utility. This utility can be launched by typing “devmgmt.msc” in the command line. Once the utility window shows up, simply right click on the troublesome device and choose Uninstall.

Lastly, there is System Restore. However, this method won’t be useful unless this feature is kept active all the time. Some advanced PC users may disable it to save spaces and processing time of applications. System Restore can be accessed by clicking the Start button and then choosing Programs followed by Accessories and System Tools. Users simply need to choose a date before they install the new conflicting hardware or software and Windows will revert everything to that date. As a result, the operating system should now be working normally again.

1. Go to Start → Programs → Accessories → System Tools → System Restore

Read more »

Fix 734 Error

How To Fix The 734 Error

Step 1 - Set The “Multi-Link Connections” For Your PC Click Start, point to Settings, and then click Network and Dial-up Connections.

NOTE: For Windows Server 2003, click Start, point to Control Panel, and then point toNetwork Connections.

Step 2 - Right-click the appropriate dial-up networking connection, and then click Properties.
Step 3 - Click the Networking tab, and then click Settings.
Step 4 - Click to clear the Negotiate multi-link for single link connections check box (if it is selected).
Step 5 - Click OK, and then click OK.

Step 6 - Double-click the connection, and then click Dial.
            * If this procedure resolves the issue and you can establish a dial-up connection, you do not have to follow the remaining steps in this article.
            * If this does not resolve the issue and you cannot establish a dial-up connection, go to step 7 to continue to troubleshoot this issue.

Step 7 - Right-click the connection, and then click Properties.
Step 8 - Click the Security tab.
Step 9 - Under Security options, click Allow unsecured password in the Validate my identity as follows box, and then click OK.
Double-click the connection, and then click Dial to verify that you can establish a dial-up connection.

Read more »